{11 Measures to Spray Paint Your Car such as the Professionals - Automobile Bodywork Paint Repair

You'll be surprised to see only how you can spray car paint actually can not be difficult. That really doesn't mean you could only grab a can of paint and go at it. There are a number of principles you should know. Both in use and the preparation.

Step A:

Prepare by gathering all of your items that you're likely to need. Make sure your surrounding area is protected against any potential through aerosol. Any parts that do not have to be sprayed and that might be taken away subsequently do thus. For other places masking tape and cover well with paper.

Measure B:

These has to be sanded with 300 grit sand paper. This will definitely smooth out the rough spots. In addition, it allows the spray car paint to adhere better. Once you've finished sanding, make sure all and debris are removed from the car. It's imperative that the auto be absolutely clean.

Step C:

This can make sure you get an overall even coating of your coloured paint plus helps the paint to adhere well. When you spray the primer, make sure you apply light layers and allow for drying in between. How to spray auto paint takes a little getting used to.

Step D:

Now you are pretty well to the point at which you are around prepared to spray the color. You might have chosen to use the spray auto paint which arrives in aerosol cans, or perhaps you've chosen for the spray gun. In either case, make several practice strokes on an item before you start with the vehicle. Once you are ready, begin the passes with the paint without hesitation. If you hold the spray can or gun in one place, you will wind up with uneven coverage and possibly the paint will run. In such a circumstance you have a major repair job on your had. You'll most likely have directions as to how to spray on car paint using the equipment or spray cans.

Step E:

You might wish to study this choice online, or check with someone that's comfortable with the way to spray car paint

Step F:

You are down to the finishing touches when you are fully satisfied with the shade. You will now want to apply several clear coatings. This can give the gloss and concluded appearance to the vehicle as well as guard the finish. It will be up to you although likely two coats will probably be adequate. Make absolutely certain it's dry in between coats.

Step G:

Once more, you might have the option of wet sanding if you like. Again, it is advisable to ask the help of people that are familiar with how to spray paint a car. You need to wet sand with all the following grits in this order, if you opt to follow this step then. Use 800, 1000, 1200, 1500 and the finally the 2000. This can remove spots that could be too heavy in the clear coat application.



Measure H:

Now you will need to utilizing a rubbing compound so you may use a 2000 grit to remove any alloy wheel repair Manchester scratches, to buff the surface.

Step I:

You need to buff the surface. To do this simply make use of a medium cut polish. You should possess a perfect glassy appearance to the finish, once you have done this.

Step J:

As a final touch, you might want to apply a couple of coats of wax.